作业帮 > 综合 > 作业

英语翻译In this study,acrylonitrile butadiene styrene (ABS) terp

来源:学生作业帮 编辑:搜搜考试网作业帮 分类:综合作业 时间:2024/06/08 07:52:45
英语翻译
In this study,acrylonitrile butadiene styrene (ABS) terpolymer was reinforced with HNO3 treated short carbon fibres (CFs).The effects of fibre weight fraction on the tensile properties of the composites were examined.Increasing the fibre weight fraction in the ABS matrix from 10 to 30 wt-% resulted in improved tensile strength and tensile modulus.To obtain a strong interaction at the interface,polyamide 6 (PA6) at varying concentrations was introduced into the ABS/10 wt-% CF composite.The incorporation and increasing amount of PA6 in the composites increased tensile properties of the ABS/PA6/CF systems due to the improved adhesion at the interface,which was confirmed by the ratio of tensile strength as an adhesion parameter.These results were also supported by scanning electron micrographs of the ABS/PA6/CF composites,which exhibited an improved adhesion between the CFs and the ABS/PA6 matrix.
英语翻译In this study,acrylonitrile butadiene styrene (ABS) terp
在本项研究中,采用经过硝酸处理过的短碳纤维(CFs)对丙烯腈二乙烯丁二烯树脂(ABS树脂)进行了加强.考察了纤维的重量百分比对混合物拉伸强度的影响.从10到30%增加纤维的重量百分比可以改善ABS树脂的拉伸强度和拉伸模数.为了在表面获得强相互作用,在纤维重量百分比10%的ABS树脂中加入了不同浓度的聚酰胺6(PA6). 在混合物中添入PA6并增加其浓度,可以改善这种ABS/PA6/CF系统的拉伸特性,因为表面粘附度得到了增强,这种增强效果通过以拉伸强度比率作为粘附参数的测试得到了证实.对这种ABS/PA6/CF混合物进行的电镜扫描的结果支持了这一结论,电镜扫描图显示出CFs与ABS/PA6混合物之间的粘附程度得到了加强.