英语翻译选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提示.按[ESC]键中止自动切割方式.需对此程序进
来源:学生作业帮 编辑:搜搜考试网作业帮 分类:综合作业 时间:2024/05/02 17:33:24
英语翻译
选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提
示.按[ESC]键中止自动切割方式.需对此程序进行改正后再选.
如果无语法错误,则系统全自动在屏幕上画出此程序的加工轨迹图形.如果
程序含有G41/G42指令,则系统将编程轨迹和加上半径补偿后的轨迹一并显示出
来.
选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提
示.按[ESC]键中止自动切割方式.需对此程序进行改正后再选.
如果无语法错误,则系统全自动在屏幕上画出此程序的加工轨迹图形.如果
程序含有G41/G42指令,则系统将编程轨迹和加上半径补偿后的轨迹一并显示出
来.
Selected procedures,the first system of inspection procedures,if grammatical mistakes,there were errors in the corresponding
Show.By [ESC] button automatically suspend cutting.Take corrective procedures after this election.
If there is no grammatical mistakes,the system fully automated paint on the screen this trajectory graphics processing procedures.If
G41/G42 procedures contain instructions,the system will be programmed trajectories and the radius of the track compensation displayed together.
Show.By [ESC] button automatically suspend cutting.Take corrective procedures after this election.
If there is no grammatical mistakes,the system fully automated paint on the screen this trajectory graphics processing procedures.If
G41/G42 procedures contain instructions,the system will be programmed trajectories and the radius of the track compensation displayed together.
英语翻译选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提示.按[ESC]键中止自动切割方式.需对此程序进
VB下面程序对产生的10个随机数进行排序,程序中有3个错误,请在相应的行上改正
lingo程序有错误,
下面的程序有语法错误怎么改
c语言的程序 对实数进行四则运算的程序 要求计算顺序,先乘除,后加减,优先括号
急:SAS程序问题我的程序中有这样一段错误提示,请问有谁知道是程序哪里出了问题啊?ERROR:Read Access V
程序改错题.请修改程序,使下面的程序是完成1+2+……+N的求和功能.(提示:有5个错误) C语言
(2014•江西)阅读如图程序框图,运行相应的程序,则程序运行后输出的结果为( )
英语翻译有电报码自动翻译程序(双向、可逆)
帮我看一下下面的matlab程序,运行时提示有错误,
lingo程序提示min行语法错误
有一如下的函数:y=-x(x0) 试编写一程序,由键盘输入x值后,程序输出相应的y值.